Case Study from HydroFLOW Chile The Challenge Mussels and marine organisms built up inside suction lines Blockages reduced flow and affected operational efficiency Frequent maintenance was needed due to fouling regrowth Chemical dosing risked higher cost and...
The Challenge Bacteria and biofouling in membranes Frequent cartridge clogging Regular shutdowns for disinfection Unstable recovery ratios The Solution Three HydroFLOW® i100 units were installed in December 2017 on the 3 inch raw water feed and post high pressure pump...
Case Study from HydroFLOW USA The Challenges Spray nozzles clogged with hard water scale Reclaimed water producing foul odours Uneven water distribution on rinse bars Frequent nozzle maintenance required The Solution One HydroFLOW® i60 and one HS40 unit were fitted to...
The Challenges CIP chemical cleaning needed every 10 to 12 days FWG opened monthly for manual cleaning Scale, bacteria, algae and slime causing fouling Chemicals used for dosing and plate cleaning The Solution One HM-100 unit was fitted to the seawater inlet pipe...
The Challenges Large amount of barnacles on cooling plates Reduced water flow lowering cooling efficiency Particle filter covered with attached barnacles Manual scrubbing damaging the filter The Solution One HydroFLOW® Marine Custom 12″ unit was fitted to the...
