HydroFLOW® Custom Range
For industries requiring bespoke water treatment solutions, the HydroFLOW® Custom Range is designed to meet the demands of large-scale operations. Whether for power plants, municipal water treatment, large cooling towers, or heavy industry, our custom-engineered solutions ensure optimal efficiency, reduced maintenance, and long-term cost savings.
A Smarter Approach to Industrial Water Treatment
The HydroFLOW® Custom Range is engineered to address limescale buildup, biofouling, and corrosion in high-demand water systems. Unlike traditional chemical-based treatments, HydroFLOW® uses patented electronic water conditioning technology to enhance system performance without altering water composition. Designed for pipes over 220mm in diameter, each unit is built to suit the specific requirements of your industrial water system.
Experience the Difference with HydroFLOW® Custom Range
Designed for Large-Scale Applications – Tailored to fit pipes from 220mm to several metres in diameter.
Helps Reduce Limescale & Hard Mineral Deposits – Supports efficient heat transfer and prevents buildup in large water systems.
Improves Energy & Water Efficiency – Reduces operational costs by maintaining system performance.
Minimises Biofouling & Corrosion – Helps protect piping networks and industrial equipment from degradation.
Scalable & Adaptable – Custom solutions for wastewater treatment, aquaculture, cooling towers, and specialised industries.
Chemical-Free & Low Maintenance – No refills, no filters-just long-term reliability.
Industries operating at large scale often face unique water management issues that require tailored treatment approaches.
🏭 Limescale in Large Boilers & Heat Exchangers – Hard scale deposits reduce heat transfer efficiency, increasing fuel and operational costs.
💦 Water Treatment in Cooling Towers & Wastewater Plants – Inefficient filtration leads to high water waste and excessive chemical usage.
⚙️ Corrosion & Biofouling in Process Water Systems – Bacteria and scale accelerate pipeline corrosion and system failures.
💰 High Chemical Dependency & Maintenance Costs – Conventional treatments require continuous chemical dosing and system shutdowns for cleaning.
Before & After
How Does HydroFLOW® Custom Range Prevent Limescale Build-Up?
Unlike traditional treatment methods that depend on chemicals or softening agents, the HydroFLOW® Custom Range transmits an electric field throughout the entire piping system, influencing mineral ions to remain suspended rather than forming hard scale. This allows for:
✔ Reduced Hard Scale Buildup – Helps maintain clean pipe walls and heat exchange surfaces.
✔ Enhanced Filtration Efficiency – Smaller particles aggregate, making filtration more effective.
✔ Optimised Water Usage – Reduces blowdown, backwashing, and overall water consumption.
Installation & Power Options for the HydroFLOW® Custom Range
The installation of HydroFLOW® Custom Range requires hardwired installation and must be wired into your industrial facility’s electrical supply. The placement of the unit depends on your specific water system setup and is crucial for achieving optimal performance. To ensure the best results, our team will assess your system and provide tailored guidance on the ideal installation location.
BEST LOCATION
The installation of HydroFLOW® Custom Range requires a hardwired installation. The location depends on your specific water system setup. To ensure optimal performance and proper placement, our team will assess your system and provide tailored guidance.
PIPE SIZE & TYPE
The Custom Range fits domestic pipe sizes from 220mm (8.66 inches) to several meters in diameter.
It works on all pipe materials, including copper, PVC, PEX, and stainless steel.
POWER SUPPLY
The HydroFLOW® Custom Range requires hardwired installation and must be wired into your industrial facility’s electrical supply. While the unit is relocatable if system requirements change, the location selected by our team is carefully determined for maximum efficiency. Moving the unit from its designated placement may result in reduced performance and system inefficiency.
FAQs
Click below to read FAQs about HydroFLOW® products.
How does HydroFLOW® work?
HydroFLOW® uses a chemical-free signal to prevent limescale buildup, biofouling, and sediment accumulation. It also gradually dissolves existing scale, improving system efficiency without altering water chemistry.
Does HydroFLOW® work on all pipe materials?
Yes, it works on copper, PVC, PEX, stainless steel, and all other piping materials.
Where should I install HydroFLOW®?
For Domestic Units:
Install HydroFLOW® on the cold water feed to the boiler, heat exchanger, or water heater for optimal protection. If this is not feasible, it can be placed anywhere between the cold water stopcock and the boiler or cylinder.
For Commercial, Industrial, and Marine Applications:
Placement depends on the specific system. In most cases, HydroFLOW® should be installed on the cold feed to the heat exchanger or key equipment to ensure maximum protection. For complex systems, consult a specialist to determine the best location.
Is it easy to install?
Yes, install it onto the pipe and plug it in - no plumbing modifications or maintenance required.
How do I know it's working?
The unit has LED indicators:
- Pearl and Pearl Plus have a rotating blue LED pattern, showing that the signal is actively being transmitted.
- K40 and HS40 have a single red LED to confirm operation.
- Commercial and industrial models have red and green light - green for power, red for signal strength.
Does HydroFLOW® require electricity?
Yes, it operates on standard mains power, using minimal energy (around £4 per year for residential units).
How long does HydroFLOW® last?
With no moving parts, units are highly durable. Residential units come with 3 year manufacturer warranty.
Commercial and Industrial units come with 3- or 5-year manufacturer's warranty, but many last over 15 years.
How does HydroFLOW® compare to water softeners?
Unlike softeners, HydroFLOW® protects the entire plumbing system without chemicals or salt, retaining essential minerals in drinking water.
Where does the dissolved scale go?
Dissolved limescale is flushed or filtered out of the system. In some cases, it settles as a fine powder at the bottom of tanks or basins, which can be periodically cleaned.
Does flow rate matter?
No. HydroFLOW® works effectively regardless of water flow rate and even treats standing water.
Will it protect my central heating system?
Yes, it prevents scale buildup in boilers, heat exchangers, and radiators, improving efficiency and longevity.
How do I see results?
Results depend on water hardness and system condition. Existing scale gradually dissolves over weeks or months, while new scale formation is immediately reduced.
What's the difference between small and large HydroFLOW® units?
Larger units have a higher power output and are designed for commercial, industrial, and marine applications.
Is the water still safe to drink?
Yes, HydroFLOW® does not change water chemistry, keeping it safe and mineral-rich.
Is HydroFLOW® covered by a warranty?
Yes, residential units include a 3-year manufacturer's warranty.
Commercial and industrial units are available with a 3-year manufacturer's warranty with an option to upgrade the warranty up to 5-years.
Trusted & Recommended - HydroFLOW®
HydroFLOW® provides a chemical-free solution for residential, commercial, industrial, and marine applications, preventing limescale buildup, biofouling, sediment accumulation, and enhancing flocculation in boilers, heat exchangers, cooling systems, pools, and piping networks.
By improving efficiency, reducing maintenance, and extending equipment lifespan, HydroFLOW® ensures a hassle-free, eco-friendly approach to water treatment.
sales@hydropath.com
+44 (0) 115 986 9966
