Case Study from HydroFLOW USA The Challenge Cooling tower inhibitor reduction was needed alongside lower water use, without losing cooling reliability The 10-cell recirculating cooling tower used large volumes of water Chemical treatment created high operating cost...
Case Study from HydroFLOW USA The Challenge A water softener alternative was needed because softeners were unsuitable for the hotel site Well water measured 923 ppm hardness, or 54 GPG Each of the 64 casitas had its own individual water heater Annual maintenance was...
Case Study from HydroFLOW France The Challenge Hot water cylinder limescale was building at around 200 kg removed each year Four 3,000 L electric hot water cylinders ran at approximately 60°C A 5 cm scale layer formed on the electric heaters Five heaters were replaced...
Case Study from HydroFLOW Jamaica The Challenge Resort hot water heater scale was building in heater cores within a single month Heaters served guest rooms, kitchens and laundry across the resort Removal for cleaning required an overhead crane Pipes and valves needed...
Case Study from HydroFLOW USA The Challenge Dishwasher water spotting was affecting dishes and particularly glassware Scale accumulated across internal dishwasher surfaces Build-up could reduce heat-transfer efficiency The hotel wanted a measurable reduction rather...
