by Hydropath | Jun 4, 2026 | Case Studies and Results
Case Study from HydroFLOW USA The Challenges Spray nozzles clogged with hard water scale Reclaimed water producing foul odours Uneven water distribution on rinse bars Frequent nozzle maintenance required The Solution One HydroFLOW® i60 and one HS40 unit were fitted to...
by Hydropath | Jun 4, 2026 | Case Studies and Results
The Challenges Chemical dosing required to maintain FWG performance Scale build-up on fresh water generator plates Cleaning intervals disrupting operation Need to maintain stable water production The Solution One HydroFLOW® HM unit was fitted to the fresh water...
by Hydropath | Jun 4, 2026 | Case Studies and Results
The Challenges CIP chemical cleaning needed every 10 to 12 days FWG opened monthly for manual cleaning Scale, bacteria, algae and slime causing fouling Chemicals used for dosing and plate cleaning The Solution One HM-100 unit was fitted to the seawater inlet pipe...
by Hydropath | Jun 4, 2026 | Case Studies and Results
The Challenges UV steriliser limited to bacteria control only No prevention of scale in the calorifier Need to maintain safe drinking water quality System reliability required at sea The Solution Two HM45 units were fitted to the cold water supply and hot water return...
by Hydropath | Jun 4, 2026 | Case Studies and Results
The Challenges Scale on plates required chemical soaking Cleaning could take up to 24 hours FWG plates vulnerable to scale build-up Maintenance time affecting onboard efficiency The Solution One HydroFLOW® HM120 was fitted to the 4″ seawater feed pipe to the...
