Case Study from HYDROPATH Asia A moulding softener alternative on 380 ppm water A moulding softener alternative was needed at a Thai injection moulding plant running on water at 380 ppm hardness. The cooling tower was cleaned every two weeks, the heat exchanger was...
Mould cooling water scale across 40 machines Mould cooling water scale was building up at a Philippine injection moulding plant running 40 machines and four cooling towers on hard deep well water. Scaling continued despite chemical dosing, acid cleaning was needed...
Case Study from Hydropath Poland Injection moulding cycle time and cooling channel scale Injection moulding cycle time was stretching at a Polish plant because scale and biofilm in the mould cooling channels were cutting heat transfer. Rotometers needed cleaning every...
Case Study from HydroFLOW USA Cooling tower blowdown reduction at a Fortune 100 headquarters Cooling tower blowdown reduction was a priority at the headquarters campus of a Fortune 100 company, where scale and biofouling in a large cooling plant meant high chemical...
Case Study from HydroFLOW USA A chemical free cooling tower at Nellis Air Force Base Nellis Air Force Base wanted to know whether cooling tower 11 could run as a chemical free cooling tower, and whether scale would return once the chemicals stopped. The tower depended...
