Case Study from HYDROPATH The Challenges Severe struvite scale in centrate lines Frequent maintenance and pipe bypassing Scaling reappearing within weeks Limited access for internal inspection The Solution One HydroFLOW® unit was fitted to the sludge feed pipe in an...
Case Study from HYDROPATH The Challenges High polymer dosing needed on dewatering Risk of floc loss at lower dose Cake dryness to be held near 21% for the THP Centrate quality to stay within process limits The Solution One HydroFLOW® i160 unit was fitted to the...
Case Study from HYDROPATH The Challenges Floc unstable when polymer dosing was reduced High polymer dosing required to hold stability Risk of floc breakdown at lower dosing Belt press operation became unstable The Solution One HydroFLOW® i120 unit was fitted to the...
