Real results from real installations

The J. P. Messerly plant in Augusta cut anti-scalant dosing to zero on two belt presses with one HydroFLOW® i160, saving roughly $4,000 a month.

Orlando's Water Conserv II ran belt press No. 5 for 150 days without cleaning, cutting pan scale from 5 mm to 1 mm and polymer use by around 20%.

The City of London Wastewater Department cleared over half its belt press first-roller holes in a 35 day trial, with no chemical or mechanical cleaning.

A Utah plant stopped $8,000 a month of struvite chemical and cut screw press cleaning from 30 hours to under four with one HydroFLOW® Custom 8 inch unit.

Denver's Robert W. Hite Treatment Facility softened heavy transfer pump struvite over 60 days, then installed four more HydroFLOW® units.

Tulsa Southside WWTP kept a cleaned belt press drum free of new struvite for 90 days, then funded treatment for the header serving all five presses.

A cleaned belt press drum at Walla Walla stayed struvite-free for eight weeks, then scaled again within weeks of the HydroFLOW® unit being switched off.

A HydroFLOW unit prevented further struvite scaling in centrate lines at Thames Water's East Hyde works in Luton.